Best Kit — Full Encapsulation System
Best

Roof Repair Kits · 3-piece kit

Best Kit — Full Encapsulation System

$749.00 CAD

The Best Kit is what you use when you want the problem solved permanently.

Liquid Rubber 5-Gallon is the centrepiece. At five gallons, you have enough to apply the recommended two-coat system to a full RV roof or shed roof up to 200 sq ft — with enough left over for touch-ups in the years ahead. It cures into a seamless, self-flashing elastomeric membrane that bonds to every substrate you're likely to encounter.

Before the Liquid Rubber goes on, Eternabond seals every open seam and tear at the bond level — microsealant penetrates the substrate, not just bridges it. Three tubes of Dicor address every vent flange and screw head.

This is the full encapsulation sequence: seal → bridge → coat. When you're done, you have a roof that meets or exceeds what a professional crew would apply, at a fraction of the cost. The only thing left to do is clean up.

Order directly from Liquid Rubber Canada or RV Part Shop Canada for guaranteed Canadian stock and formulation.

Components & Specs

Liquid Rubber Flat Roof Coating 5-Gal, Eternabond RoofSeal Tape 4"×50', Dicor 501LSW Lap Sealant ×3

Best for: Full roof resurfacing (RV, flat, shed, low-pitch), Roofs with widespread surface degradation, Commercial-grade DIY results, Long-term permanent repair
Not recommended for: Quick emergency patches (use Good Kit instead), Steep-pitch shingle roofs over 6:12
Qty
1

Kit includes: • 1× Liquid Rubber Flat Roof Coating — 5-Gallon Pail • 1× Eternabond RoofSeal Tape — 4" × 50' • 3× Dicor 501LSW Self-Leveling Lap Sealant — 10.3 oz tubes

Coverage estimate: 5-gallon Liquid Rubber covers 150–200 sq ft at two coats (recommended). Eternabond covers 50 linear feet of seam. Three Dicor tubes handle 3 vent flanges.

Application temperature: +5°C to +35°C. Allow 72 hours for full cure before water exposure.

Dimensions
3-piece kit
Weight
~25 kg total